OVERVIEW
Cryogenic CV Medium Flow Pump
Flow Rate: 0.5 – 2.2 gpm
Pressure: 3000 – 6000 PSI
Horsepower: 5 to 10 hp
NPDP Medium Flow Pump
1.5 to 2.2 GPM
Oxygen, Argon, Nitrogen Service
NEMA 4 Electrical Control Panel with push button start/stop, hour meter, pressure switch
7.5 to 7.0 to HP
HP Safety Relief and Surge Chamber
Vacuum Jacketed Cold End
NPDP Drive End with removable crank assembly feature
Powder Painted Steel Skid and Belt Guard
CP High Flow Pump
Flow rate of 1.7 – 4.0 gpm (15 liters/min.) at
4000 psi (275 bar) maximum working pressure
10-20 hp TEFC motor; NEMA 4 electrical control with manual disconnect, motor starter, hour meter, pressure gauge, over-pressure switch and On/Off button control
Large diameter cold end
Vacuum-jacketed, super-insulated valve
Heavy-duty drive end
Surge chamber and pressure relief valve
Cryochem High Flow Pump – CV P1600/P790/P1800
Flow rate of 1.7 – 4.0 gpm (15 liters/min.) at
4000 psi (275 bar) maximum working pressure
10-20 hp TEFC motor; NEMA 4 electrical control with manual disconnect, motor starter, hour meter, pressure switch
The PD 300 is designed with main components that are proven to provide maximum performance and long service life with minimum maintenance and easy service
Operates at slower speeds than competitive pumps
Heavier, moisture-sealed drive-end bearings
All bearings are retained in split/bolted housing for easy replacement
Replaceable crosshead wear band eliminates excessive wear and frequent replacement of crosshead piston. Wear band can be changed quickly and easily
Longer connecting rod for reduced crosshead loading
Self-adjusting, spring-energized pushrod shaft seal contained in simple cartridge housing for easy replacement through hand-access opening
Super insulated vacuum sump
Wyo CO₂ and N₂O Pump
50 lbs. / min. (22.7 Kg/min.) at 1000 psi maximum working pressure
7.5 hp motor with surge chamber, relief valve, liquid-filled pressure gauge, safety bypass valve set @ 1000 psi, cool-down valve and heavy duty base